Boiler ELECTROLUX Formax DL 100l
Boiler ELECTROLUX Formax DL 100l
- Ex Tax: 210.00€
X-Heat is a system of "dry" independent heating elements.
Heating elements (heating elements) are responsible for the reliability and durability of the storage water heater.
The Electrolux Formax DL series water heaters have a unique and reliable system of two independent "dry" heating elements:
X-Heat. The peculiarity of this system is the absence of direct contact of heating elements with water.
The heating elements are located in special metal casings fixed to the flange at the bottom of the tank. This design avoids the formation of scale, makes it possible to use the device in half power mode, save energy, and also significantly increases the service life of the heating elements. Even if one of the heating elements fails, the other will continue to work, which guarantees you hot water regardless of the circumstances. Thanks to the system of "dry" heating elements X-Heat, service and repairs can be carried out without dismantling the water heater.
In the Formax series, the device is operated using convenient control knobs. In the Formax DL series, thanks to the electronic control panel, you can easily set the required water heating temperature with an accuracy of 1 ° C. The LED display shows the temperature and the selected heating power level.
Multi Memory Technology
A unique feature of the Formax DL series is the Multi Memory technology, which allows three individual water heating modes to be programmed and installed in the device's memory. The settings of individual modes and temperature of water heating are saved even if the power supply is turned off. After the power supply resumes, the water heater will continue heating up to the previously set temperature.
Thanks to the use of modern technologies, Electrolux water heaters of the Formax DL series
can be installed both vertically and horizontally, which greatly simplifies the choice of a place for installing the device.
Safety and energy savings
The water heaters of the Formax DL series have an Eco-mode, in which the water will be heated up to 55 ° C. It was found that at such a temperature, the working life of the heating element increases, the water is disinfected, and virtually no scale is formed. Also, these models have the ability to control the heating power (3 power levels - 800/1200/2000 W) - this allows you to place the water heater in a room with almost any power supply.
4-stage protection system
The Protect tank system is responsible for the multi-level protection of the internal tank against corrosion, which includes 4 levels:
1. Special high-strength metal alloy, resistant to corrosion.
2. Protective coating of the inner tank with high-strength and elastic enamel.
3. Magnesium anode of increased mass, which traps and neutralizes corrosive particles.
4. Safety valve with drain function, protecting the device from overpressure inside the tank.
Also, the water heater is equipped with an overheating protection system and a residual current device, which provides additional safety during the operation of the device.
Highly efficient thermal insulation
The devices are insulated with a 22 mm thick layer of polyurethane foam, an environmentally friendly CFC-Free material, which is filled using a special technology under high pressure. It is safe for the environment and human health, has excellent heat-insulating properties and reduces
heat losses and high energy consumption to a minimum.
7 years internal tank warranty
Multilevel protection of the inner tank against corrosion thanks to a finely dispersed enamel coating, a safety system and an overweight magnesium anode, allows a 7-year warranty on the inner tank
|Heating time up to 75C, t||3,8|
|Dimensions (HxWxD), mm||879x460x454|
|Weight with water, kg||132,2|
|Power supply, V||220|