Diesel heater Ballu BHDP-30 (direct heating)

• FLAME STABILIZATION SYSTEM
• BUILT-IN THERMOSTAT
• 17 l
• 30 kW

Direct heating diesel air heater Ballu BHDP-30 of the Tundra series is designed for heating non-residential premises and local heating of work surfaces. The thermal power of the device is 30 kW. When the diesel gun is operating, the air flow, passing through the protective grille, is drawn into the combustion chamber. There it mixes with diesel fuel atomized by the nozzle, which is supplied from the fuel tank with the help of a powerful high-pressure pump, forming an air-fuel mixture. With the help of 12kV electrodes, the mixture is ignited and burned, and then it is thrown out, mixing with the products of combustion and with the bulk of the incoming air, thereby heating it. The heat-reflecting screen, located in the front end of the device case, serves as an obstacle to the escaping open flame and ensures uniform heating of the room or the heated work surface.

The high-precision thermostat built into the heater with convenient and understandable off-line adjustment maintains the set temperature.

The safety of using a diesel heat gun Ballu BHDP-30 of the Tundra series is ensured by an electronic control board using a temperature sensor and a photocell that controls the presence of a flame - it stops the device in an emergency.

The volume of diesel fuel is measured by a level sensor and displayed on a gauge built into the fuel tank.

The double-sided anti-corrosion coating of the Ballu BHDP-30 Tundra heat gun will allow you to maintain an excellent appearance throughout the entire service life of the product.

Application

For heating non-residential premises and local heating of working surfaces.

Advantages:

Specially shaped low temperature jacket

High level of efficiency close to 100%

Powerful transformer ignition system 12 kV with electronic control

Built-in high sensitivity thermostat (allows you to maintain the set temperature in the heated room)

Flame control system with photocell

Multi-level electronically controlled security system

Powerful high performance fuel pump

Additional flame protection

Metal housing with heat reflective screen

Double-sided anti-corrosion coating of the housing

Extended fuel tank

Shock-absorbing rubber wheels

Comfortable handles for moving

Electrical cable winders

Automatic maintenance of the set temperature

Built-in fuel level sensor

Ventilation holes in the control box

Integrated fuel pre-filter

Air purification filter

SPECIFICATIONS

Heat exchanger material AISI 430 steel

Warranty period 12 months

Country of origin China

Scope Industrial equipment

Fuel tank volume 17 l

Effective for rooms area up to 300 m2

Burner ignition Electronic

Heating method Direct heating

Max. productivity 700 m3/hour

Max. thermal power 30 kW

Average fuel consumption 2.4 kg/h

Type of control Electronic

Temperature control Yes (electronic controller)

Number of heating modes Stepless power adjustment

Mode 'without heating' No

Overheat protection Yes

Low Fuel Automatic Shutdown Yes

Flame detection (cuts off fuel supply) Yes

Separate outlet of exhaust gases from the combustion chamber No

Fuel type Diesel

Type of installation (mounting) Floor

Max. power consumption 0.23 kW

Power supply voltage, V 220

Electrical connection Mains cable

Weight and dimensions of the goods

Product weight (net) 17.5 kg

Product height 0.44 m

Product depth 0.31 m

Product width 0.77 m