• TECHNICAL CATALOGUE (PDF)
• INSTALLATION MANUAL (PDF)
• OUTPUTS TABLE (XLS)

TRENCH HEATERS FC

FOR HEATING

NATURAL CONVECTION

• 396 models

• Stainless steel casings

• Tested according to EN 16430 in

independent accredited laboratory

• 10 year warranty

• One of the highest heat output on themarket

• Еxceptional rigidity of casings

• Max operating pressure 25 bar

• Highly efficient, rapid and economic copper - aluminium heat exchangers

• Good compatibility with heat pumps

• All fixing brackets and bolts have sound proofing elements

• Reversible reinforced profile grille

• Possibility to change level of casing at any time during exploitation (when installed in raised floors)

TRENCH

HEATERS FC

These simple floor-mounted trench heaters FC operate on the principle of natural convection.Optimal sized and located heat exchangers and specially designed air flow separation/guiding elements result a considerable capacity even without the use of a fan, thereby allowing these convectors to operate as the main heating appliance in high energy performance buildings. Due to low inertia, can quickly increase and maintain the set room temperature, providing the room with exactly as much heat as you require just when it is required. Create an effective warm air curtain for large windows, without allowing cold to penetrate the premises. The heat is perfectly distributed throughout the room. Fully floor-mounted, and therefore do not impede free passage. Perfect for any interior, as the only visible element is the grill, the material and colour of which matches floor covering. May be walked on and can easily withstand the weight of a number of adults. The convectors are supplied with a stainless steel casings and copper-aluminium heat exchangers, to ensure they remain extremely reliable over the long-term.

10-year warranty

We are confident in the longevity of our trench heaters; therefore, we provide them with a 10-year guarantee. 

Tested according to EN16430

The outputs of trench heaters FC have been tested by independent accredited laboratories according to the current standards.

With us, 1 kW means 1 kW.

Work perfectly with low-temperature energy carriers

Due to their high efficiency, FС are suitable for operating with low-temperature

energy carriers, such as heat pumps and condensing boilers.

Maximum operating pressure – 25 bar

All the devices are factory-tested for leaks at a pressure of 30 bar. The maximum maintained pressure (strength limit) is 110 bar. Konveka devices easily withstand hydraulic tests, hydraulic shocks and can be installed in extremely tall buildings. 

Noiseless

Completely noiseless operation

Sound insulation

All the supporting parts have soundinsulating elements, to prevent the spread of sound to the premises below.

All casing parts are made of stainless steel

Stainless steel provides 100% corrosion protection, is 54% stronger and 45% harder than carbon steel.

Reinforced casings

As a standard, the FС convector casings are equipped with:

1. Stiffening elements to maintain the pressure of the concrete – from 2 to 7 pcs, depending on the length of the casing.

2. M10 support screws to withstand the vertical load – from 4 to 20 pcs.

3. Mounting brackets for attaching the casing to the floor – 4 pcs.

These structural elements, together with the strong casing material, ensure their stable shape during installation, transportation and operation.