Daikin Altherma 3 Air-To-Water Heat Pump 11-16 kW with integrated boiler

Daikin Altherma 3 Air-To-Water Heat Pump 11-16 kW with integrated boiler

Product Code:EBVX-ERLA
Outdoor unit code: ERLA
Indoor unit code: EBVX
- COP up to 4.8
- The outdoor unit works at -25C ambient temperature
- Quick and easy installation
- Indoor units with small dimensions
- Hot gas melting technology of the outdoor unit
- GAS Injection
- Simple and user-friendly remote control
- New software

Low temperature air-to-water heat pump
World’s first high capacity R-32 refrigerant split heat pump with cooling.

How does it work?
The Daikin Altherma outdoor unit extracts up to 75% of its energy in the outside air to provide heating, cooling and hot water, while the rest is provided by electricity. The air-to-water heat pump relies on a compressor and a refrigerant to transfer the energy from the air to the water, and heat the water up to your needs and to deliver it into your house.

Highest energy label
Air-to-water heat pumps are among the most economical heating solutions. By relying on air to answer your heating, cooling and domestic hot water needs, the heat pump achieves the highest energy labels.

A redesigned casing
A black horizontal front grille hides the single fan, reducing the perception of sound produced by the unit. The light grey casing reflects the installation space to help the unit blend into any environment.

A single fan for high-capacity units
Daikin engineers replaced the double fan with one larger fan and optimised its shape to lower the operational sound and improve air circulation.

Ideal for small spaces
Thanks to its single fan, the height is reduced, and its black grille makes it fit discretely in all kind of exteriors.

Running on refrigerant R-32
Daikin is a pioneer in launching heat pumps equipped with R-32. With a lower Global Warming Potential (GWP), the R-32 is equivalent in power to standard refrigerants, but achieves higher energy efficiency and lower CO2 emissions. Easy to recover and reuse, R-32 is the perfect solution for attaining the new European CO2 emission targets.

Reduced environmental impact: CO2eq > 75% reduction
› GWP: R410A: 2,088 > R32: 675
› 30% less refrigerant charge needed

All year round comfort
Daikin Altherma 3 R provides heating efficiently, both for space or domestic water. With a leaving water temperature of up to 60°C at –7°C outside, the unit is intended for new buildings. The unit operations are ensured down to -25°C outside temperature.
As a low temperature heat pump, it is particularly efficient with low temperature emitters, such as underfloor heating and heat pump convectors, both available in the total Daikin solution.

World first in its category
Indeed, Daikin Altherma 3 R is the world first high capacity R-32 refrigerant split heat pump to provide cooling, next to heating!
The unit includes a patented plate heat exchanger, positioning once more Daikin as the heat pump leader.

The Daikin Altherma 3 floor standing unit is the ideal system to deliver heating, domestic hot water and cooling for renovation or large new built.

All in one system to save installation space and time
› A combined stainless steel domestic hot water tank of 180 or 230 L and heatpump ensures a faster installation compared to traditional systems.
› Inclusion of all hydraulic components means no third party components are required.
› PCB board and hydraulic components are located in the front for easy access
› Small installation footprint of 595 x 634 mm
› Integrated back-up heater choice of 6, 9 kW models are available
› Dedicated bi-zone models allowing temperature monitoring for 2 zones.

Reduces the installation footprint and height. Compared to the traditional split version for a wall mounted indoor unit and a separate domestic hot water tank, the integrated indoor unit greatly reduces the installation space required.
With a small footprint of 595 x 634 mm, the integrated indoor unit has a similar footprint when compared to other household appliances.
For installation projects, almost no side clearance is necessary as the piping is located at the top of the unit.
With an installation height of 1,65 m for an 180 L tank and 1,85 m for a 230 L tank, the required installation height is less than 2m.
The compactness of the integrated indoor unit is emphasised by its sleek design and modern look, easy blending in with other household appliances.

Advanced user interface
- The Daikin Eye
The intuitive Daikin eye shows you in real time the status of your system.
Blue is perfect! Should the eye turn red, an error has occured.
- Quick to configure
Log in and you’ll be able to completely configure the unit via the new interface in less than 10 steps. You can even check if the unit is ready for use by running test cycles!
- Easy operation
Work super-fast with the new interface. It’s super easy to use with just a few buttons and 2 navigational knobs.
- Beautiful design
The interface was especially designed to be very intuitive. The high contrasted colour screen delivers stunning and practical visuals that really help you as installer or service engineer.

Onecta App, now available with voice control.
Manage your heating system from your smartphone.

- Voice control
To provide users with even more comfort and ease, the Onecta App now offers voice control. This hands-free feature cuts down on clicks to manage units faster than ever before. Cross-functional and multilingual, voice control pairs well with any smart device, including Google Assistant and Amazon Alexa.
- Schedule
Set up a programme outlining when the system should operate, and create up to six actions per day.
- Control
Customise the system to fit your lifestyle and year-round comfort levels.
- Monitor
Receive a thorough overview of how the system is performing and how much energy it consumes.

User-friendly wired remote controller with premium design.
Madoka. The beauty of simplicity

Madoka combines refinement and simplicity
› Sleek and elegant design
› Intuitive touch-button control
› Three colours to match any interior
› Compact: measures only 85 x 85 mm

Easy update via Bluetooth
It is strongly recommended to make sure that the user interface is up to date. To update the software or check if updates are available, all you need is a mobile device and the Madoka Assistant app. The app is available on Google Play and in the App Store.

Award-winning design
Madoka received an IF Design Award and Reddot Product Design Award for its innovative design. These awards represent two of the most prestigious and largest design competitions in the world.

Tags: Daikin, Altherma, Air-To-Water, Heat, Pump, 11-16, with, integrated, boiler