Daikin Altherma 3 Air-to-water heat pump 4-8 kW

Daikin Altherma 3 Air-to-water heat pump 4-8 kW

Product Code:EHBX + ERGA

- Integrated WIFI controller

- COP up to 5.1 for heating and COP up to 3.3 for domestic water (EN16147)

- Refrigerant R-32

- External work up to -25C

- Magnetic filter and by-pass valve included

- Estonian menu

- The outer part does not require a bottom defrost cable

- New design

- Inverter SWING compressor

The latest third generation of Daikin Altherma 3 air-to-water heat pumps uses Daikin's signature Bluevolution technology and a combination of Daikin inverter technology compressors and refrigerant R-32 to achieve seasonal A +++ energy efficiency.

Top performance

The Daikin Altherma 3 heat pump is equipped with Bluevolution technology, which makes optimal use of innovative compressor technology;

It is the first air-to-water heat pump to run on the new R-32 refrigerant.

Your energy bill stays low thanks to the top efficiency of the heat pump, which is marked with the highest energy class, until the A +++ * energy label design 2019

Easy installation

The Daikin Altherma 3 air-to-water heat pump has been redesigned to optimize installer life, ensuring easy, quick installation and maintenance.

The installation of an indoor unit with a domestic water heater takes up only 0.36m² of floor space.

When designing the installation of an Altherma 3 air-to-water heat pump, there is no need to take into account the additional space on the sides of the pump, as the entire piping is installed on top of the pump.

The art of regulation

Using the new interface is intuitive.

After setting, the "Daikin Eye" signals the operation of the Daikin Altherma 3 heating and hot water system and confirms that comfort meets your needs!

Why choose an Altherma 3 air-to-water heat pump?

The Daikin Altherma 3 air-to-water heat pump is the ideal solution for heating, domestic hot water and cooling for both near-zero energy buildings and the renovation of existing heating systems.

All-in-one heating system

The combined stainless steel domestic water tank (180L or 230L) and heat pump ensure faster installation compared to traditional systems, where these systems are separate devices.

The Daikin Altherma 3 air-to-water heat pump kit immediately includes all hydraulic components (bypass, magnetite filter) for heat pump installation.

Requires very little installation space compared to other heat pumps (600 × 600 mm)

Integrated auxiliary heating (3, 6, 9 kW)

Bi-zone models allow the control of two different heating circuits

Award-winning design

A heating solution is the heart of your home. For a better fit, the Daikin Altherma 3 has a whole new look. Choose color: white or silver gray!

Altherma 3, recognized for its innovative design, has recently won the iF DESIGN AWARD, one of the world's most prestigious and largest design competitions.

Environmental friendly

Daikin Altherma 3 makes full use of the outside air as a renewable energy source. This is the first air-to-water heat pump to run on the new R-32 refrigerant.

It warms your house and supplies your family with hot water while minimizing CO2 emissions!

State-of-the-art technology and energy efficiency

Daikin is constantly developing innovative, environmentally friendly and most efficient heat pump technologies to achieve the best energy efficiency parameters and to respect the planet we live on.

Daikin's Bluevolution technology uses R32 refrigerant, which greatly reduces CO2 emissions compared to competitors.

Daikin is once again leading the way in creating better heating solutions and saving our environment.

All in one design and construction

Compared to the split version of the traditional wall-mounted indoor unit and separate hot water tank, the Daikin Altherma 3 air-to-water heat pump significantly reduces the space required. With a small footprint of just 595x600mm, the Altherma 3 indoor unit is similar in size to any other household appliance, be it a fridge or washing machine or the like.

The Altherma 3 air-to-water heat pump can be installed without the need for additional space on the sides of the unit, as all piping is at the top of the unit. The height of the device with a 180L domestic water tank is 1.65m and the height of the device with a 230L domestic water tank is 1.85m, and in both cases a height of less than 2m is required to install the entire device.

The compactness of the indoor unit also has a very stylish and modern look, thanks to which it blends seamlessly with other household appliances.

Magnetite filter

The new filter allows extremely easy maintenance. It is not necessary to remove the water filter to remove the dirt in the heating system, but the dirt particles can be emptied directly into the tank in the heat pump. The filter with a sieve filter also includes automatic ventilation. Precipitation in the heating system due to the reaction of different metals and the corrosion of oxygen is an even bigger problem than red rust. As it moves with the water flow, the sediment spreads throughout the system, forming an additional layer of insulation, damaging the circulation pumps, clogging the radiator thermostatic valves and balancing. The magnetite particles are so fine that no sieve filter can handle them, so they settle all over the system (boilers, heat exchangers, heaters, radiators, pipes, heat pumps, etc.). Problems arise in the new systems already in the second or third heating period, because in modern systems many different metals are used

Technical parameters of air-to-water heat pump Daikin Altherma 3


Tags: Daikin, Altherma, Air-to-water, heat, pump, 4-8, AIR-TO-WATER, pumps