The "Grand Meyer® EcoNG170" twin-conductor electric heating mat is designed to provide comfortable underfloor heating in all types of rooms. It can be used under any flooring material: ceramic tiles, marble, linoleum, or carpet. It can be installed both on a new screed and on an existing floor during room renovation, where maintaining a low screed thickness is essential.

1. Twisted heating conductors made from CuNi, CuCr, or NiCr alloys depending on resistance

2. Inner insulation made of new-generation heat-resistant cross-linked polyethylene (XPLE)

3. Aluminum foil shielding

4. Drain wire made of twisted Al-Mg strands

5. Outer insulation made of modified polyvinyl chloride (PVC) with increased heat resistance

6. Synthetic fiberglass mesh, 50 cm wide

7. Joint connection

8. - 3.0 m cold lead cable

A) The heating cable thickness is only 3.6 mm, allowing for the use of a minimal layer of tile adhesive.

B) The heating cable is firmly stitched to an ultra-thin and durable synthetic mesh only 0.2 mm thick, which does not deform during installation.

Parameters: Article, Size (L × W), Coverage Area, Power, Current, Resistance, Cable Length

– EcoNG170-010: 0.5 × 2.0 m, 1.0 m², 170 W, 0.7 A, 287–388 Ω, 10.2 m

– EcoNG170-015: 0.5 × 3.0 m, 1.5 m², 255 W, 1.0 A, 192–259 Ω, 15.4 m

– EcoNG170-020: 0.5 × 4.0 m, 2.0 m², 340 W, 1.4 A, 144–194 Ω, 20.5 m

– EcoNG170-025: 0.5 × 5.0 m, 2.5 m², 425 W, 1.7 A, 115–155 Ω, 25.6 m

– EcoNG170-035: 0.5 × 7.0 m, 3.5 m², 595 W, 2.4 A, 82–111 Ω, 35.9 m

– EcoNG170-045: 0.5 × 9.0 m, 4.5 m², 765 W, 3.1 A, 64–86 Ω, 46.1 m

– EcoNG170-055: 0.5 × 11.0 m, 5.5 m², 935 W, 3.8 A, 52–70 Ω, 56.4 m

– EcoNG170-065: 0.5 × 13.0 m, 6.5 m², 1105 W, 4.4 A, 44–59 Ω, 66.6 m

– EcoNG170-070: 0.5 × 14.0 m, 7.0 m², 1190 W, 4.8 A, 41–55 Ω, 71.7 m

– EcoNG170-080: 0.5 × 16.0 m, 8.0 m², 1360 W, 5.5 A, 36–48 Ω, 82.0 m

– EcoNG170-090: 0.5 × 18.0 m, 9.0 m², 1530 W, 6.1 A, 32–43 Ω, 92.2 m

– EcoNG170-110: 0.5 × 22.0 m, 11.0 m², 1870 W, 7.5 A, 26–35 Ω, 112.7 m

– EcoNG170-130: 0.5 × 26.0 m, 13.0 m², 2210 W, 8.9 A, 23–30 Ω, 133.2 m

– EcoNG170-150: 0.5 × 30.0 m, 15.0 m², 2550 W, 8.9 A, 19–26 Ω, 153.7 m

– Cable type: shielded twin-conductor

– Power supply: ~230 V

– Rated power density: 170 W/m²

– Maximum operating temperature: +90 °C

– Minimum installation temperature: –10 °C

– Cable outer diameter: 3.6 mm

– Mat thickness: 3.8 mm

– Mat mesh width: 50 cm

– Power supply cable for the mat: 3.0 m, PVC 3×1.0 mm²

– Conductor colors: brown – phase (L), blue – neutral (N), yellow-green – ground (PE)

– EcoNG150 heating mat

– Self-extinguishing PVC corrugated conduit with temperature sensor socket

– System installation manual

– Warranty card

Grand Meyer® heating mats and cables are manufactured in Latvia, Europe.

The EcoNG170 heating mats and THC20 heating cables come with a 20-year warranty.